Menu
Specs & Setup About Case Studies Pricing
Talk to Us 01233 456 789
Specs & Setup

What it is, and what it runs.

Portable, modular solar and battery storage that mounts to your fence line. Here's the detail.

Output 5kW
Storage 5.8kWh
Setup 20min
Emissions 0%
A solar array mounted to temporary site fencing
The base unit

One system, built to grow.

Everything starts from the same base unit. Four panels, a 5kW inverter and a 5.8kWh battery, mounted to your fencing rather than sat on the ground.

From there it's modular. Add battery packs for longer runs, or more panels to bring the charge back quicker. Nothing gets replaced as you grow, it gets added to.

Base unit specification

Solar array 4 × 400W panels
Array output 1.6kW
Inverter From 5kW continuous
Battery storage 5.8kWh, expandable
Grid capability On & off-grid hybrid
Mounting Fence, wall or hoarding
Transport Luton van
Setup time Around 20 minutes
Emissions & noise Zero · Silent
Configurations

Three standard builds.

Battery storage is what determines how long you run without sun. Panels determine how fast it comes back.

Base unit

5.8kWh

  • 4 × 400W panels
  • 5kW inverter
  • Single battery pack

Base + 1 pack

11.6kWh

  • 8 × 400W panels
  • 5kW inverter
  • Two battery packs

Base + 2 packs

17.4kWh

  • 12 × 400W panels
  • 5kW inverter
  • Three battery packs

Need something outside these? See pricing and custom builds →

What it runs

Will it power my site?

Typical site loads, and roughly how long the base unit holds them with no sun at all. Solar input extends every one of these.

Load
Draw
On 5.8kWh
CCTV / security mast
~50W
4 days +
LED site lighting
~200W
~29 hrs
Tool charging station
~300W
~19 hrs
Welfare cabin (heating)
~1.5kW
~4 hrs

Want to combine loads? Try the capacity estimator →

Mounting

It goes on the fence, not the floor.

The panels mount directly to temporary site fencing, boundary walls, hoarding and permanent fencing. No ground fixings, no scaffold, and nothing to reinstate when the job finishes.

  • Temporary site fencing — the standard heras-style panels already on your compound.
  • Hoarding and boundary walls — solid runs where there's height to work with.
  • Permanent fencing — farm boundaries, paddock lines and garden fencing.
Close-up of the panel mounting arrangement
Setup

On site and running the same visit.

It arrives in a Luton van and goes up in around 20 minutes on a straightforward site. We do the lot.

A unit set up and running on site
01

We work out the configuration

You tell us the loads and the site. We spec panels, storage and mounting around it.

02

It comes out in the van

Delivered by us, not a haulier. Nothing to book in, nothing to wait around for.

03

Mounted, wired and tested

Around 20 minutes from unloading to live power, depending on the run of fence.

04

Handed over on site

We walk your team through it before we go, and you can ring us any time after.

Array mounted to site fencing
Battery and inverter unit on site
Panel detail

Want one specced for your site?

Tell us what you're running and where. We'll come back with what we think would work.

Get an estimate